ULTRAVIOLET DIRECT TO FILM (UV DTF)

1. Surface Prep
   Clean your chosen surface and ensure its dry.
2. Backing
   Peel the white backing sheet from the print.
3. Placement
   Slowly lay the design down on your chosen surface taking extra care. Once the film touches the surface its almost impossible to remove.
4. Pressure
   With your fingers or a squeegee, press the film onto the surface working from the centre outwards, pushing out any air bubbles. Lightly rub over the whole design to make sure the sticker has attached to the surface.
5. Carrier
   Very carefully peel the clear carrier film from the print, you're all done!